Typhon – Li-Po 750 mAh/11,1 V 60/120C, 8,32 Wh

$18.00

60/120C Ultra high performance LiPo battery pack for the most demanding applications (like helicopters), charge rate 2C. Three-cell 3s1p 11.1V 750mAh. Dimensions: 55x23x23mm, weight: 59g, XT30 power connector, JST-XH balance connector. Perfect for the OMP HOBBY M2 EVO mini helicopter.

Category: Tags: , , ,
Compare
Capacity [mAh] 750
Voltage [V] 11.1
Charging current [A] 0.75 – 1.5
Max. charging current [A] 1.5
Discharging current [A] 45
Max. discharging current [A] 90
Energy [Wh] 8.3
Length [mm] 55
Width [mm] 23
Height [mm] 23
Weight [g] 59

 

Typhon high-end three-cell lithium-polymer 60/120C battery packs pump fresh energy into the veins of your giant models! Thanks to the advanced technology applied in their manufacture, they guarantee extremely high load capacity when discharging, enable fast charging with long service life and favourable purchase price. The pack has been “tailored” to the OMP HOBBY M2 EVO mini helicopter.

Typhon batteries have a standard discharge current of 60C, peak current up to 120C, and a fast-charging opinion (1–2C). They are specially designed for high-performance aerobatic specials and scale models powered by brushless electric motors and RC helicopters for 3D and classic flying. The high current load capacity ensures maximum motor power utilization and allows for an aggressive flying style while maintaining a very long service life.

Don’t charge the Typhon batteries with currents higher than 2C, for normal operation, we recommend currents between 1–2C. We recommend using a balancer with every charge. Typhon batteries don’t require initial formation, but if you intend to charge the pack by a current greater than 1C, we recommend not exceeding 1C for the first three charge cycles. There is no need to fully discharge the battery before charging – e.g. you can safely charge batteries that are only 50% discharged.)

The battery is supplied as an “Air Pack” designed primarily for powering models of aeroplanes and helicopters. It is equipped with silicone power (charging) cables with a diameter dimensioned for the expected current loads (XT30 connector). The service connector is a type of the standard JST-XH system – they have the advantage of small size and weight (which will be especially appreciated by users of packs with a low capacity), they have simple pin connections and can even be plugged directly into the balancer sockets on KAVAN, RAYTRONIC, SkyRC and other chargers without the use of an adapter.

The package includes: Typhon 60/120C battery, user manual.

Weight 59 g
Dimensions 55 × 23 × 23 mm
X
Scroll to Top